Oxygen Generators and Concentrators
 

 

OXYGEN CONCENTRATORS

A generator for high-concentration ozone requires the supply of oxygen. You can produce oxygen out of these concentrators from ambient air. The oxygen concentrator can be purchased with or without compressor and are recommended for use with our ICT and DCT ozone generator series. It is recommended to install filters such as water, oil and dehumidifier on the inlet of an oxygen concentrator.

THESE OXYGEN CONCENTRATORS ARE KNOW FOR THEIR:

  • Compact design
  • Low maintenence requirements
  • Low investment and operation cost
  • Low noise level
  • Constant Pneumatic Impedance
  • Large number of models to suit every need
  • Easy to install
  • CE approved

You will find information about our products below, see the datasheets for each product for detailed specifications.

Contact us if you want to know more.

Specifically designed for reliability, energy efficiency, and ease of use, there are thousands of Onyx PSA Oxygen Generators currently in use throughout the world. The Onyx’s reliability, low noise level, and ability to deliver up to 95.5% oxygen concentration make it a perfect fit for many applications. These generators require no special installation. Simply connect the oxygen outlet to your application or oxygen distribution system and the power cord to a grounded electrical outlet. Turn the unit on and set your oxygen flow rate.

TYPICAL APPLICATIONS

MANUFACTURING

  • Jewelry/Brazing/Soldering
  • Glass Work/Blowing

ENVIRONMENTAL

  • Ozone (Generator) Feed Gas
  • Environmental Remediation

ADDITIONAL

  • Fish farming
  • Oxygen Bar
  • Exercise with Oxygen (EWOT)
  • Wellness/spa

Specifically designed for reliability, energy efficiency, and ease-of-use, there are thousands of Topaz PSA Oxygen Generators currently in use throughout the world. The Topaz’s ability to deliver up to 95.5% oxygen concentration make it a great fit for a wide range of commercial applications. These generators require no special installation. Simply connect the oxygen outlet to your application or oxygen distribution system and the power cord to a grounded electrical outlet. Turn the unit on and set your oxygen flow rate.

TYPICAL APPLICATIONS

MANUFACTURING

  • Jewelry/Brazing/Soldering
  • Glass Work/Blowing
  • Thermal/Chemical Oxidation

ENVIRONMENTAL

  • Ozone (Generator) Feed Gas
  • Environmental Remediation
  • Waste/Water Treatment

ADDITIONAL

  • Fish farming

Specifically designed for reliability, energy efficiency, and ease-of-use, there are thousands of Topaz PSA Oxygen Generators currently in use throughout the world. Generating up to 18 LPM (38 SCFH) in a compact package, at up to 95.5% oxygen concentration, the Dual Topaz Plus is a great fit for a wide range of commercial applications. These generators require no special installation. Simply connect the oxygen outlet to your application or oxygen distribution system and the power cord to a grounded electrical outlet. Turn the unit on and set your oxygen flow rate.

TYPICAL APPLICATIONS

MANUFACTURING

  • Cutting/Brazing/Soldering
  • Glass Work/Manufacturing/Blowing
  • Thermal/Chemical Oxidation

ENVIRONMENTAL

  • Ozone (Generator) Feed Gas
  • Environmental Remediation
  • Waste/Water Treatment

ADDITIONAL

  • Fish farming

The Centrox is an oxygen concentrator ideal for use in many applications. TheCentrox’s ability to deliver up to 95.5% oxygen concentration at flows of up to 15 LPM (32 SCFH) make it a great fit for medical and commercial uses requiring up to 345 kPa (50 psig). These generators require no special installation. Simply connect the oxygen outlet to your application or oxygen distribution system and the power cord to a grounded electrical outlet. Turn the unit on and set your oxygen flow rate.

TYPICAL APPLICATIONS

MANUFACTURING

  • Brazing/Soldering
  • Glass Work/Blowing

MEDICAL

  • Anesthesia
  • Oxygen Therapy
  • Veterinary Medicine

ENVIRONMENTAL

  • Ozone (Generator) Feed Gas
  • Environmental Remediation

ADDITIONAL

  • Fish farming

The Reliant is an oxygen concentrator ideal for use in small clinics. The Reliant’s ability to deliver up to 95.5% oxygen concentration at flows of up to 8 LPM (17 SCFH) make it a great fit for many applications requiring up to 50 psig (345 kPa). An optional module enables the Reliant to supply 8 LPM of compressed, dried, and filtered medical air. Under normal operation, the Reliant is toggled between supplying either oxygen or compressed medical air. The presence of an internal oxygen storage tank and an optional auxiliary oxygen receiver, allows the Reliant to temporarily supply oxygen while simultaneously producing medical air. The duration for such dual mode operation is limited by the size of oxygen storage tanks and the oxygen use rate. This simultaneous dual-supply mode enables the Reliant to briefly provide medical air without an interruption to the flow of oxygen.

TYPICAL APPLICATIONS

MEDICAL

  • Anesthesia
  • Oxygen Therapy
  • Veterinary Medicine

AVAILABLE OPTIONS

  • Medical Air Oulet (factory-installed)
  • Auxiliary Oxygen Receiver (free standing)

Workhorse oxygen concentrators simplify the process of oxygen system selection and setup. Simply plug the unit in and turn on for high concentrated oxygen delivered quietly and reliably. Each Workhorse is the result of the same stateof-the-art engineering that produced the Advanced Technology Fractionators® (ATF). The necessary components have been meticulously matched to optimize performance. The Workhorse is intended to provide a turnkey solution when time or resources are not available to engineer a custom system. These PSA systems are economical and maintenance-free. These generators require no special installation. Simply connect the oxygen outlet to your application or oxygen distribution system and the power cord to a grounded electrical outlet. Turn the unit on and set your oxygen flow rate.

TYPICAL APPLICATIONS

MANUFACTURING

  • Jewelry/Brazing/Soldering
  • Glass Work/Blowing

MEDICAL

  • Hospital Systems

ENVIRONMENTAL

  • Ozone (Generator) Feed Gas
  • Environmental Remediation
  • Waste/Water Treatment

ADDITIONAL

  • Fish farming
  • Cosmetic

The Workhorse-23 Profile is a revolutionary oxygen concentrator system that provides 11 LPM (23 SCFH) of oxygen (including an oil-less compressor onboard) in the same space as the previous generation conventional two-bed 6 and 7 LPM (12 and 15 SCFH) systems. The Workhorse-15 Profile oxygen system offers the same superior performance of the standard Workhorse model, but in less space. Workhorse-15 technology can be offered as a replacement for older, existing systems where space considerations are important. Workhorse utilizes Advanced Technology Fractionator® (ATF). These generators require no special installation. Simply connect the oxygen outlet to your application or oxygen distribution system and the power cord to a grounded electrical outlet. Turn the unit on and set your oxygen flow rate.

TYPICAL APPLICATIONS

MANUFACTURING

  • Jewelry/Brazing/Soldering
  • Glass Work/Blowing

MEDICAL

  • Hospital Systems

ENVIRONMENTAL

  • Ozone (Generator) Feed Gas
  • Environmental Remediation
  • Waste/Water Treatment

ADDITIONAL

  • Fish farming
  • Cosmetic

Alpha-Series Oxygen Generators produce from 0.56 to 141.58 m3 (20 to 5,000 ft3) of oxygen per hour at up to 95.5% oxygen concentration.

When electricity and a source of compressed air is supplied, these dependable machines can provide oxygen for any application. Designed specifically for applications with fixed flow and pressure characteristics, the reduced size oxygen receiver feature of our Mini Pack Generators offers a quick startup and a significantly smaller footprint than comparable systems that utilize a standard, separate receiver.

TYPICAL APPLICATIONS

MANUFACTURING

  • Cutting/Brazing/Soldering
  • Thermal/Chemical Oxidation
  • Glass Work/Manufacturing/Blowing

MEDICAL

  • Hospital Systems

ENVIRONMENTAL

  • Ozone (Generator) Feed Gas
  • Environmental Remediation
  • Waste/Water Treatment

ADDITIONAL

  • Fish farming

The Advanced Technology Fractionators® (ATF) oxygen modules incorporate proven pressure swing adsorption (PSA) principles into a unique patented design, which allows these systems to be compact, efficient, rugged, and lower in cost. The ATF module offers unparalleled design flexibility and enables applications where on-site/onboard oxygen generation was previously impractical. A patented single rotary distribution valve built into the ATF module is continuously rotated at low speed by a small motor. The valve is maintenancefree, self-cleaning, insensitive to contamination, and invulnerable to wear. It sequentially directs the flow of compressed air to a group of four sieve beds (adsorption), while at the same time another four beds are purged into the atmosphere though the valve (desorption). The remaining four of the twelve beds are interconnected through the valve to equalize pressure as the sieve beds sequentially transition between adsorption and desorption. The small amplitude pressure swings generated by the ATF’s twelve sieve beds eliminate loud noise pulses, eliminate the need for a pressure regulator, and reduce compressor wear.

TYPICAL APPLICATIONS

MANUFACTURING

  • Glass Work/Blowing
  • Brazing/Soldering

MEDICAL

  • Anesthesia
  • Oxygen Therapy
  • Veterinary Medicine

ENVIRONMENTAL

  • Ozone (Generator) Feed Gas
  • Environmental Remediation

ADDITIONAL

  • Fish farming
  • Cosmetic

Each member of the Quad Family utilizes patented Advanced Technology Fractionator® (ATF) modules connected together in a subsystem. When used with oil-less compressed air, Quads deliver high oxygen flows and concentration without high cost. Quads can be matched with dry, oilless appropriate compressed air sources. Quad oxygen concentrators offer the same design simplicity as the ATF and build upon it by connecting four modules together to produce four times as much oxygen. As with the ATF, the Quad is easy to install and requires virtually no maintenance. Simply plug in and connect the compressed air source. Quad includes an oxygen concentration monitor, pressure gauges, and a flow meter. To operate, turn the flow meter to the appropriate oxygen level and receive a smooth, steady supply of oxygen.

TYPICAL APPLICATIONS

MANUFACTURING

  • Cutting/Brazing/Soldering
  • Thermal/Chemical Oxidation
  • Glass Work/Manufacturing/Blowing

MEDICAL

  • Hospital Systems

ENVIRONMENTAL

  • Ozone (Generator) Feed Gas
  • Waste/Water Treatment