How to succeed?

Our in-house developed RENA-systems are tailored and manufactured in our own facilities in Sweden. Over 25 years of experience has allowed us to map the most common mistakes made during design and installation of ozone systems. Consequently, we have compiled 20 key factors that we believe should be taken into account in order to succeed with your ozone installation. The prerequisite for a successful and efficient air treatment is that the whole “kitchen exhaust air treatment“-chain is properly adapted to the local conditions.

Kitchen ducts with ozone treatment

Guide for air treatment in commercial kitchens

Read more in our brochure The Right Product for the Right Application for more information on high-performance ozone generators (RENA Kitchen) and air-fed air-cooled ozone generators (FTX).

 

 

 

  

 

 

 

    
1. Purpose of the treatment Grease reduction and fire safety, energy recovery or odor reduction?
2. Type of cooking What is the grease load in the exhaust air? What are the sources of grease and cooking odors?
3. Air flow How high is the air flow that needs to be treated?
4. Number of hoods/kitchens Do you need to treat several hoods/kitchen exhausts? Are there multiple injection points?
5. Exhaust Air Where is the discharge point? On the roof, from the façade or into a courtyard/pedestrian street?
6. Ducting What is the length and dimensions of the duct? Is optimal reaction distance reached?
7. Purification capacity Is the right amount of ozone used for the air flow and the type of cooking?
8. Ventilation balance Is the ozone system allowed to affect the ventilation balance of the ventilation system in the building?
9. Injection point Where is the injection point and does it treat the most flammable part of the duct?
10. Energy recovery Should heat be recycled? What type of heat exchanger is used?
11. SFP-value Does the intended ozone system affect the SFP value?
12. Filter Is an additional filter required?
13. References How does the solution work in similar installations?
14. Choice of material Which materials are used in the generator? Stainless steel or ozone resistant stainless steel?
15. Product specifications Does the product have a calibration certificate?
16. Operating costs What are the actual operating costs?
17. Maintenance What type of maintenance is required? How often? What are the costs?
18. Noise level How much noise is generated by the product?
19. Experience How much experience does the supplier have? What do other clients think of them?
Last but not least...  
20. Do you have “the right product for the right application?  

 

Read more about RENA Kitchen here or in our brochure.

Ozone tech